Sceptre Technologies X42 - Manual (Page 7)

SCEPTRE X42 HDTV User Manual
- 7 -
www.SCEPTRE.com
Installation
Please read the user manual carefully before performing the installation. The power consumption of
the display is approximately 250 watts. Please use the power cord designated for the product. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and
the grounding feature must not be defeated. The product should be installed on a flat surface to avoid
tipping. Space should be maintained between the back of the product and the wall for proper
ventilation. If you would like to mount the TV onto the wall, please see page 7, 8, and, 14 for
additional information. Avoid installing the product in the kitchen, bathroom or other places with high
humidity dust or smoke, so as not to shorten the service life of the electronic components. Please
ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or
counterclockwise installation may induce poor ventilation and successive component damage.
Removing the Base for Wall Mounting
1. Please handle the TV with two or more people. Please locate a large flat surface (i.e. table) and
put a soft cloth (i.e. blanket) on the surface. Please set the TV facing down on the flat surface
so the panel does not get damaged.