Receiving calls – Southwestern Bell 2-9193 User Manual
Page 15
15
SMITH JOHN
8:59 8/24
AM
CALL #
NEW
06
9 1 4 - 6 5 6 - 5 6 6 6
RPT
TOTAL CALLS 06
8:59 8/24
PM
NEW
05
Repeat symbol
New Call symbol
appear on the display for 20 seconds when a message waiting signal
(on) from the Central Office is received.
2.
The NEW MESSAGE indicator will go off and “
MSG WAITING OFF”
will appear for 20 seconds if the message waiting off signal is sent
from the Central office.
I
F
YOU
ARE
IN
AN
AREA
WHERE
AN
FSK
SIGNAL
IS
NOT
AVAILABLE
:
1.
This unit will check your line for a
stutter dial tone every time you hang up
or each time a call goes unanswered.
The NEW MESSAGE indicator will flash
when there is a message waiting.
2.
You may experience some delay in
seeing the NEW MESSAGE indicator
light up even though there are
messages in your mail box. This delay
is due to regulatory matters and does
not indicate a problem with the unit.
This unit may not be activated or
deactivated under certain conditions. For
example, when you retrieve your message
from an outside phone (not your own
telephone number), the NEW MESSAGE
indicator may not be canceled when you
return home. If you experience this
situation, pick up the receiver and hang up.
The NEW MESSAGE indicator will cancel
3. The number will be displayed and dial
automatically.
R
ECEIVING
C
ALLS
1.
When the telephone is not in use and a
new call is received, the display will
show the NEW symbol, the phone
number, thc caller’s name, and time and
date of the call for 20 seconds. The RPT
(Repeat) symbol will appear if the call
has come in more than once.