Southwestern Bell 2-9193 - Manual (Page 14)

14
Call Waiting symbol
JACK SMITH
10 : 59 9/24
PM
CALL #
NEW
36
6 5 5 - 5 6 6 6
CW
The Call Waiting (CW) symbol will flash for
16 seconds along with the telephone
number and name of the person who is on
call waiting. Press the FLASH button to put
the existing call on hold and answer the new
call.
No matter whether you answer the call or
not, the Call Waiting Caller ID will store the
call information for future reference.
NOTE: Make sure you have subscribed to
both Call Waiting Caller ID and Caller ID
service from your local telephone company.
If you only have Caller ID service, the unit works for caller ID only.
U
SING THE
C
ALLER
ID F
UNCTION
M
ESSAGE
L
IGHT
An indicator marked NEW CALL will light up to let you know when there
are new calls received.
If you have a voice mailbox service with your telephone company, another
indicator marked NEW MESSAGE will flash to alert you to dial your
telephone company to check your new messages.
The NEW MESSAGE indicator also monitors the unit’s situation. When the
phone is in use, the NEW MESSAGE indicator will be on continuously. If
the indicator is flashing quickly, it means the phone is ringing. If it is not
ringing and the light is flashing, the unit has experienced a power outage.
M
ESSAGE
W
AITING
This unit’s Message Waiting Detection is for both FSK and Stutter Tone
Systems.
I
F YOUR SERVICE IS
FSK:
1. If you have a voice mailbox service from the phone company, the
NEW MESSAGE indicator will flash and “
MESSAGE WAITING” will