SIIG 04-0265F - Manual (Page 4)

4
Figure 3. Connecting the Serial ATA cable
5. Follow the same instructions when connecting a
second hard drive. Device connection is now
complete.
6. Replace the computer cover and reconnect the power
cord.
Driver Installation
This section provides information on how to install the
Serial ATA PCI drivers.
Windows 98SE
For New Windows 98SE Installation
1.
Install the board and follow Microsoft procedures
to install Windows 98SE accordingly.
2. Once Windows has been installed, right click My
Computer and click Properties. Select Device
Manager tab.
3. Double click PCI Mass Storage Controller listed
under Other Devices.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver CD and click Next.
Serial ATA
cable