SIIG 04-0265F - Manual (Page 11)

11
To Verify Windows 2000/XP/2003 Installation
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Double click SCSI and RAID Controllers, Silicon
Image SiI 3512... Controller should be displayed.
Windows Vista ™ (32-bit)
For New Windows Vista Installation
1.
Install the board and follow Microsoft procedures
to install Windows Vista accordingly.
2. At the Where do you want to install Windows?
screen, click Load Driver.
3. Insert the driver CD, then click OK.
4. Select Silicon Image SiI... SATALink Controller...,
then click Next.
5. Follow the on-screen instructions to complete the
Windows Vista installation.
For Existing Windows Vista Installation
1.
At the Found New Hardware Wizard, click Locate
and install driver software (recommended).
2. Click Continue, insert the driver CD, click Next.
3. Click Close to complete the installation.
Windows Vista (64-bit)
For New Windows Vista 64-bit Installation
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do yo want to install Windows? screen,
click Load Drivers.
3. Insert the driver CD, click Browse.