beautypg.com

Select the function, 3 sec – Sunbeam BVMC-ECMP1001W User Manual

Page 7

background image

PREPARING CAPPUCCINO

Prior to preparing your cappuccino, adjust the amount of frothing milk

according to your preference by turning the Froth Control Knob to the right for

more froth and to the left for less froth. For Cappuccino, it is recommended

that the Froth Control Knob be turned to the Cappuccino setting.

MORE FROTH

LESS FROTH

NOTE: The froth intensity can be adjusted during the brewing cycle.
a. Press the Cappuccino Button “

” once to brew a small cup of cappuccino.

b. Press the Cappuccino Button “

” twice to brew a large cup of cappuccino.

a.

x1

b.

x2

NOTE: For a small cup, use the single shot filter. For a large cup, use the

double shot filter.

PREPARING LATTE

Prior to preparing your latte, adjust the amount of frothing according to your

preference by turning the Froth Control Knob to the right for more froth and

to the left for less froth. For Latte, it is recommended that the Froth Control

Knob be turned to the Latte setting.

MORE FROTH

LESS FROTH

a. Press the Latte Button “

” once to brew a small cup of latte.

b. Press the Latte Button “

” twice to brew a large cup of latte.

English 13

TURNING THE UNIT ON

a. Make sure unit is plugged in.
b. Turn unit on “I”.

a.

b.

The 3 control panel lights will start pulsing during heating until the brew and

steam heaters reach the perfect temperature. Once these lights become

solid, the unit is ready to use.
NOTE: It is normal for the Espresso function to be ready before the

Cappuccino and Latte functions.
NOTE: If you leave your unit on for 15 minutes without using, your unit will

go into sleep mode. Press any button to reactivate.

SELECT THE FUNCTION

PREPARING ESPRESSO

a. Press the Espresso Button “

” once to brew one single shot.

b. Press the Espresso Button “

” twice to brew a double shot.

c. Press and hold the Espresso Button “

” for 3 seconds to customize the

brewing to your preference. When done, press the Espresso Button “

once again to stop brewing. For safety, unit will automatically stop after

brewing 5 ounces.

a.

x1

b.

x2

c.

hold for

3 sec.

The unit will start brewing the espresso according to your selection. The unit

will turn

off automatically and the lights will become solid indicating that the

cycle has been completed. Your delicious espresso is ready to be enjoyed.

NOTE: To brew less coffee than the preset serving, press the function button

to stop the brewing process when the amount of coffee desired is reached.

English 12

This manual is related to the following products: