Sirius Satellite Radio SIRIUS STILETTO 2 Model SLV2 - Manual (Page 100)

97
Additional Information
Sedan/Coupe Antenna Cable Routing Procedure
To route the antenna cable in a sedan/coupe follow these detailed cable installation
instructions.
1. Feed Cable Under
Rubber Molding
Around Window
4. Route Cable from Trunk
Under Interior Trim, into
Cabin and Towards Front
of Vehicle
6. Bring Cable Out To
SIRIUS Radio
Location
5. Bring Cable out from
Trim and Route Under
Carpet to Dashboard
or Console.
2. Route Cable Out of
Window Molding and
Into Weatherstripping
Around Trunk Opening
3. Route Cable Along
Trunk Wall and Into
Cabin
Feed the cable from the antenna underneath the rubber molding around the rear
window. Use a plastic putty knife or similar object to lift the rubber molding around the
rear window and tuck the antenna cable underneath the molding. Route the antenna
cable around and down the window to the lowest point. If your rear window does not
have rubber molding, SIRIUS recommends consulting with a professional installer.
Route the antenna cable out of the window molding and into the rubber weather
stripping around the trunk opening. Lift the weather stripping from the opening and
1.
2.