beautypg.com

Product description, Specifications, Emission control (exhaust & evaporative) – Shindaiwa T282 TRIMMER X7502824801 User Manual

Page 6

background image

6

Product Description

Using the illustration as a guide, famil-

iarize yourself with your machine and its

various components. Understanding your

machine helps ensure top performance,

long service life and safer operation.

WARNING!
Do not make unauthorized

modifications or alterations to any of

these units or their components.

IMPORTANT!

The terms “left”, “left-hand”, and

“LH”; “right”, “right-hand”, and “RH”;

“front” and “rear” refer to directions as

viewed by the operator during normal

operation.

Outer Tube

Trimmer Head

Grip

Cutting

Attachment Shield

Gearcase

Handle

Throttle

Trigger

Ignition

Switch

Fuel

Tank

Specifications

Model

T282

Engine Type

Air cooled, two stroke, single cylinder gasoline engine

Dry Weight (Without guard and strap)

6.6 kg / 14.7 lb

Dimensions

1775 x 314 x 345 mm / 69.9 x 12.4 x 13.6 in.

Bore x Stroke

1.38 x 1.18 in./ 35 x 30 mm

Displacement

28.9 cc/1.7 cu. in.

Fuel/Oil Ratio

50:1 with *ISO-L-EGD or JASO FD class engine oil

Fuel Tank Capacity

750 ml/25.4 oz.

.

Carburetor Type

Diaphragm-type carburetor

Ignition

One-piece electronic, transistor-controlled

Spark Plug

BPMR6A

Spark Plug Gap

0.6 mm (0.024 in)

Torque

16.7 - 18.6 N∙m (148-165 in • lbf)

Air Cleaner Type

Non-reversible foam filter element

Starting Method

Recoil

Stopping Method

Slide switch

Transmission Type

Automatic, centrifugal clutch w/bevel gear

Engine Idle Speed

3,000 RPM

Clutch Engagement Speed

3,800 RPM

Wide Open Throttle Speed (W.O.T.)

9,600 RPM

*Specifications are subject to change without notice.

Emission Control (Exhaust & Evaporative)

EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM (engine modification) and, if the second to last character of the En-

gine Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system

is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions).

Evaporative emissions for California models are only applicable to fuel tanks.