Shindaiwa T282 TRIMMER X7502824801 - Manual (Page 17)

17
Muffler and spark arrester maintenance
Cooling System
Engine Cover
Screws
Muffler Cover
Engine Cover
Muffler
Cover
Screw
Spark Arrester
Screen Spark Arrester
Cover
Outlet
Screws
Muffler Gasket
Muffler
Gasket
Muffler
Screws
Muffler and spark arrester maintenance
IMPORTANT!
If you note excessive carbon buildup, consult with an authorized Shindaiwa servicing dealer.
If the engine becomes sluggish and low on power, check and clean the spark arrester screen.
1. Remove the spark plug boot.
2. Remove the engine cover and muffler cover.
3. Remove the spark arrester screen and cover.
4. Clean the screen with a stiff bristle brush.
5. Remove the muffler.
6. Inspect the cylinder exhaust port for any carbon buildup.
7. Gently tap the muffler on a wood surface to dislodge any loose carbon.
8. Reassemble the spark arrester, muffler and engine cover in the reverse order of disassembly.
WARNING!
Never operate the unit with a damage or missing muffler or spark arrester! Operating with a missing or damaged spark
arrester is a fire hazard and could also damage your hearing.