Silicon Laboratories Network Card - Manual (Page 11)

Ethernet-DK
Rev. 0.6 11
9. Save the selected configuration using the File
Save As menu.
10. Generate a new project with supporting firmware by selecting Generate Project from the File menu (see
Figure 9).
11. When prompted for a folder to save the project, browse to an empty directory or create a new directory.
Note: Any files in the selected directory will be overwritten. Click the OK button.
12. Click the OK button when the “Project generated successfully” message appears.
13. Close the TCP/IP Configuration Wizard.
Figure 9. TCP/IP Configuration Wizard Project Generation