Sony DVP-NS400D - Manual (Page 67)

Us
ing Va
ri
ou
s
Additiona
l Func
tions
67
Controlling the TV
You can control your TV using the buttons
below.
∗
Use the number buttons only to enter the code
number of controllable TVs.
∗∗
If you connect the player to the TV via the SCART
(EURO AV) jacks, the input source for the TV is set
to the player automatically when you start playback
or press any button except for [/1. In this case,
press TV/DVD to return the input to the TV.
Hold down TV [/1, and enter your AV
receiver’s manufacturer’s code (see the
table) using the number buttons. Then
release TV [/1.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifiers
(receiver).
Controlling the AV amplifier (receiver)
You can change the volume of the AV
amplifier (receiver) using 2 +/
– .
Manufacturer Code number
Sony (default) 01
Grundig 11
Hitachi 24
Loewe 45
Nokia 15, 16, 69
Panasonic 17, 49
Philips 06, 07, 08
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43
Toshiba 38
By pressing You can
TV [/1 Turn the TV on or off
2 (volume) +/– Adjust the volume of the TV
(wide mode) Switch to or from the wide
mode of a Wide TV
t (TV/VIDEO) Switch the TV’s input source
between the TV and other input
sources
TV/DVD** Switches the TV’s input source
between the TV and player
Controlling AV amplifiers (receivers)
with the remote
Manufacturer Code number
Sony 91, 89
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
1 2 3
4 5 6
7 8
0
9
Number
buttons
TV [/1
2 +/–