Sony DVP-NS400D - Manual (Page 54)

54
3
Press X/x to select one of the
SURROUND sounds.
Refer to the following explanations
given for each item.
For 2 speaker setups
•
TVS DYNAMIC
•
TVS WIDE
•
TVS NIGHT
•
TVS STANDARD
For 4 (or more) speaker setups
(If you select “NONE” in the setting of
“REAR” in “SPEAKER SETUP”(page
89), you cannot select these modes.)
•
NORMAL SURROUND
•
ENHANCED SURROUND
•
VIRTUAL REAR SHIFT
•
VIRTUAL MULTI REAR
•
VIRTUAL MULTI DIMENSION
4
Press ENTER.
To cancel the setting
Select “OFF” in Step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
When you connect only 2 front speakers,
TVS (TV Virtual Surround) lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers.
Select one of the following modes:
If the player is set up to output the signal from
the DIGITAL OUT (OPTICAL or
COAXIAL) jack, the surround effect will be
heard only when you set “DOLBY DIGITAL”
to “D-PCM” in “AUDIO SETUP”(page 74).
TVS (TV Virtual Surround) DYNAMIC
Uses sound imaging to create virtual rear
speakers from the sound of the front speakers
(L, R) without using actual rear speakers (shown
below). The sound imaging effect is distinct and
clearly reproduces each aural element of the
audio track.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
TVS (TV Virtual Surround) WIDE
Uses sound imaging to create virtual rear
speakers from the sound of the front speakers
(L, R) without using actual rear speakers. The
virtual speakers are reproduced as shown in
the illustration below. This gives the sound
an expanded effect that fills the area
surrounding the listener.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
TVS (TV Virtual Surround) NIGHT
The large sounds, such as explosions, are
compressed, but the quieter sounds are
unaffected. This feature is useful when you
don’t want to disturb other people but still want
to hear the dialog and enjoy the surround sound
effects of TVS WIDE.
For 2 speaker setups
TV
TV