When digital output is selected – Sony DVP-NS400D User Manual
Page 30
30
qa
Press X/x to select the item, then press ENTER.
•
When “NO” or “LINE OUTPUT L/R (AUDIO)” is selected, Quick Setup is finished and
connections are complete.
•
When “DIGITAL OUTPUT” is selected, the Setup Display for “DOLBY DIGITAL” appears.
•
When “5.1CH OUTPUT” is selected, the Setup Display for “SPEAKER SETUP” appears.
1
Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 23 to 27 (
through ).
2
Press ENTER.
DTS is selected.
3
Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 23 to 27 (
through ).
When DIGITAL OUTPUT is selected
Audio Cord Connection Type
You select
Page
D-PCM
DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby
Digital decoder)
Audio Cord Connection Type
You select
Page
OFF
ON (only if the amplifier (receiver)
has a DTS decoder)
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
CENTER SPEAKER EQ:
FLAT
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
DTS:
DOLBY DIGITAL
C-2
D-2
B-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
CENTER SPEAKER EQ:
FLAT
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
OFF
48kHz/96kHz PCM:
ON
DTS:
OFF
B
D
C-2
D-2
B-2