Samsung HomePAD HP2777AT - Manual (Page 56)

56
HOW TO INSTALL HOME STATION
Step4: Remove the upper hinge
cover using a cross screwdriver
Step1: Put the home station on
the top of refrigerator
Step7: Connect the home sta-
tion ground wire to the upper
hinge hole
Step3: Attach the home station
to the top of refrigerator
CAUTION
1. Pull the power plug out,
before installing the home sta-
tion.
-. Otherwise, there is a risk of
electric shock.
Step6: Connect the door side
charging connector to the home
station charging connector.
Step5: Take off the upper hinge
cover
Step8: Close the upper hinge
cover and replace the upper hinge
cover using a cross screwdriver
Home station
Step2: Connect the refrigerator
power cable to the home station
port
Home station rear panel
Refrigerator power cable
Fridge door upper hinge cover
Step9: Remove the tape of
cover-wire base
Step10: Insert wires into the cover-
wire base and attach cover-wire
base to the refrigerator Step11: Close the cover-wire
base with the cover-wire harness
connector charging
cover-wire base tape
cover-wire base
cover-wire base
cover-wire harness
upper hinge hole
ground wire
upper hinge
Home station
rear panel
refrigerator
back side
*Insert the home station
boss into the boss hole
boss hole
home station boss