Samsung HomePAD HP2777AT - Manual (Page 49)

49
USER INTERFACE
REMOTE OPERATION
Network Setup - Internet Setup
-.You can set up internet here, if you did not set up Internet in
LOGGING IN process.
-.You can refer to "LOGGING IN - Internet Setup" for inputting or
modifying data.
WEP (Wired Equivalent Privacy): This encrips data to ensure
Wireless LAN security.
Registration of Remote Control Setup
After registering refrigerator serial NO., user ID and Password,
you can control your refrigerator from a remote PC.
1. During initial start, you can register serial NO, your ID and
Password when Logging-in
2. If you miss this procedure, you can also register in
HomePAD™ properties>Edit customer profile>register profile.
3. Click "Main" button to reboot or "Next" button system to con-
tinue customer registration process. HomePAD™may reboot
to save data. after reboot, you can see following message
and registration is done.
4. If the following error appears "sending information to server
has failed", check your internet status or turn the HomePAD TM
off and on .
Please confirm whether ESSID is set up correctly. If
this page is not displayed, ESSID was not set up
cor-rectly.
Use WEP: You can select whether it is to use a WEP feature
and to use an encoding way of several bit(64bit,128bit)
Key1~4: You must set up four items for encoding all
Key Selection: Select key to actually use for encod
ing of WEP among four items.
1.You must set up HomePAD TM Encryption after set
ting Home Station Encryption.
2.If you set up HomePAD TM and Home Station
Encryption must match for proper communication.
WARNING
WARNING