beautypg.com

Basic operations, Listening to the sound, Listening to the sound 1 – Sony 4-140-464-21(2) User Manual

Page 12

background image

12

GB

Listening to the sound

1

Press "/1 to turn on the system.
The "/1 indicator lights off when the
system is turned on.

2

Press INPUT repeatedly.
Each press changes as follows:

Notes

• Select INPUT 1 to listen to device

connected to INPUT 1 jack.

• Select INPUT 2 to listen to device

connected to INPUT 2 jack.

3

Start playing on the connected
device.

4

Turn JOG (or press VOLUME +/–
on the remote) to adjust the
volume.

Tips

• Depending on the connected device, it

may be necessary to adjust the volume on
the connected device as well.

• The volume level on the system may vary

depending on the connected device.

5

Press "/1 to turn off the system
after use.
The "/1 indicator lights up when the
system is turned off.

Using the headphones/earphones

Connect the headphones/earphones to the
i

(headphones) jack on the subwoofer.

Notes

• If the connected device has a BASS BOOST

function, set it to off as it may cause audible
distortion.

• If connecting the speaker to a device with a

built-in radio or tuner, radio reception may not
occur or sensitivity may be reduced
significantly.

To activate the muting function

Press MUTING on the remote.
The muting function will be canceled
when you do the following.
• Press MUTING again.
• Turn JOG to increase the volume.

Press the VOLUME + on the remote.

• Turn off the system.

Basic Operations

t INPUT 1 t INPUT 2