Savin 1502 - Manual (Page 43)

Sort
29
2
Sort
Type 1 requires the optional 16MB copier memory unit.
The machine can scan your originals
into memory and automatically sort
the copies.
• Sort
• Rotate Sort
Limitation
❒ The maximum paper length for the
sort function is less than 433 mm.
❒ You cannot use the bypass tray
with the Rotate Sort.
Note
❒ The maximum tray capacity is as
follows. When the number of cop-
ies exceeds the tray capacity, re-
move copies from the tray.
❖ ❖ ❖ ❖ Metric version
❖ ❖ ❖ ❖ Inch version
❒ The maximum tray capacity might
be less than the above when you
use the Rotate Sort.
❒ The maximum tray capacity might
also be reduced when copy paper
is considerably curled.
Sort
Copies can be assembled as sets in se-
quential order.
❖ ❖ ❖ ❖ Sort
❖ ❖ ❖ ❖ Rotate Sort
Two sorting methods are available:
❖ ❖ ❖ ❖ Sort
Copies can be assembled as sets in
sequential order.
❖ ❖ ❖ ❖ Rotate Sort
Every other copy set is rotated by
90
°KL and delivered to the copy tray.
Note
❒ To switch between Sort and Rotate
Sort modes, access the user tools.
See “9.Sort” in P.62 “Settings You
Can Change with the User Tools”.
❒ The paper sizes that can be used with
the Rotate Sort function are as follows:
Internal tray • B4JIS or larger: 250
sheets (80g/m 2 )
• A4 or smaller: 500
sheets (80g/m 2 )
Internal tray • 8 1 /
2
" × 14" or larger:
250 sheets (20 lb)
• 8 1 /
2
"
× 11" or small-
er: 500 sheets (20 lb)
Metric version A4
KLB5JISKL
Inch version 8 1 /
2
"
× 11"KL