Savin 1502 - Manual (Page 33)

19
2. Copying
Basic Procedure
A
Make sure that the machine is in
Copy mode.
Note
❒ If not, press the {Copy} key.
B
When the machine is set for user
codes, enter the user code with
the number keys and then press
the
{{{{#}}}} or {{{{OK}}}} key.
Reference
See P.35 “User Codes”.
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{Clear Modes} key.
D
Set your originals.
Reference
See P.21 “Setting Originals”.
E
Set the desired settings.
F
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum copy quantity
can be set between 1 and 99 (de-
fault: 99). See “2.Max. Copy
Q’ty” in P.62 “Copier Features”.
❒ To change the number entered,
press the
{Clear/Stop} key and
enter the new number.
G
Press the
{{{{Start}}}} key.
The machine starts copying.
Note
❒ To stop the machine during the
multi-copy run, press the
{Clear/
Stop
} key.
❒ To return the machine to the in-
itial condition after copying,
press the
{Clear Modes} key.
❒ For Type 1 without the optional
16MB copier memory unit, you
cannot copy more than 1 page
from the document feeder.