Sharp PG-MB60X - Manual (Page 59)

-55
Useful Features
Helpful Functions Set during Installation (“Options2” menu)
Setting a Password
••••• There is no factory preset for the password, so
the “Options2” menu is enabled.
••••• If you do not want others to operate the “Op-
tions2” menu, set a password.
Menu operation Page 42
Example: “Options2” screen menu
1
Select “Password” from the “Op-
tions2” menu, and press .
• The screen for entering the password is displayed.
2
Press '
' ' ' ' or " " " " " to set the first digit in
“New Password” and then press |
| | | |.
3
Enter the remaining 3 digits and
press .
4
Enter the same password in “Re-
confirm” and press .
Note
• The password must be entered to use the “Op-
tions2” menu when a password has been set.
Changing the Password
1
Press '
' ' ' ', " " " " " and | | | | | to enter the
password in “Old Password” and
press .
2
Press '
' ' ' ', " " " " " and | | | | | to set the new
password in “New Password” and
press .
3
Enter the same 4-digit password in
“Reconfirm” and press
.
Note
• If you do not want to set a password, leave the
fields blank in steps 2 and 3 and press .
• To cancel the password settings, press .
If You Forget Your Password
If you forget the password, delete it using the fol-
lowing procedure and set a new password.
Note
• If is held down for more than 3 seconds, the op-
eration buttons on the projector will be locked. (See
page
54 .)
• You can only use the buttons on the projector to de-
lete the password.
Press
.