Samsung HL-P4674W - Manual (Page 49)

LNA (Low Noise Amplifier)
When a weak broadcast signal causes unclear noisy picture the “LNA” feature improves the
picture quality by setting to “On”. If you experience noise on a certain channel, set the “LNA” to
“On” or “Off” for this channel, to obtain the optimum picture.
English - 49
1 Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
2 Press the … or † button to
select “LNA”, then press the
ENTER button.
3 Press the … or † button to
select “On” or “Off”, then
press the ENTER button.
Press the EXIT button to exit.
NOTE
• This function works in “ANT 1 IN” mode only (not available in
“ANT 2 IN” mode).
Channel
▲ More
LNA : Off
Scan
Move Enter Return
Input
Picture
Sound
Channel
Setup
Off
On
Channel
Antenna : Ant.1 √
Air/CATV : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Channel
▲ More
LNA : On √
Scan √
Move Enter Return
Input
Picture
Sound
Channel
Setup
BP68-00423A-00(46~67) 9/2/04 4:58 PM Page 49