Sharp UX-P115 - Manual (Page 57)

Distinctive Ring (Requires Subscription to Service)
55
5. Special Functions
4
Press a number from 1 to 3 (1 to 5 in Canada) to select the ring pattern
below that matches your second number's ring pattern. Or, press 6 to
have your fax automatically answer your normal telephone number.
Press 7 to turn off the distinctive ring function.
5
Press to return to the date and time display.
6
Set the reception mode to FAX.
♦
When using distinctive ring, you must set the reception mode of your fax to
FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that other
devices on the same line will also ring until your fax answers. If one of your
other numbers is dialed, the fax will ring; however, it will not answer.
RING PATTERN 1 Two short rings.
RING PATTERN 2 One short, one long, and one short ring.
RING PATTERN 3 Two short rings and one long ring.
RING PATTERN 4
(Canada only) Three very short rings.
RING PATTERN 5
(Canada only) Two very short rings.
STANDARD RING Your standard (normal) ring pattern.
OFF SETTING Turn distinctive ring off.
STOP
The display briefly shows
your selection, then:
FAX TEL
FAX SIGNAL RX
1
2
3
4
5
6
7
RESOLUTION/
RECEPTION MODE