Searching for an auto-dial number – Sharp UX-P115 User Manual
Page 36
Sending a Fax by Automatic Dialing
34
Searching for an auto-dial number
If you don’t remember the Speed Dial number in which you have stored a full
fax or phone number, follow these steps to search for the number.
1
If you are sending a fax, load the
document(s).
•
If desired, press
to set the
resolution and/or contrast.
2
Press
(or
) until the name of the other party appears in the
display (if no name was stored, the number will appear).
3
If you are sending a fax, press
. Dialing and transmission
begins.
•
If the transmission is completed successfully, the fax will beep once.
•
If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 59).
If you are making a phone call, lift the handset. Dialing begins. (If you
lifted the handset before searching for the number, press
to
begin dialing.)
RESOLUTION/
RECEPTION MODE
START/MEMORY
START/MEMORY
READY TO SEND