Sharp UX-P115 - Manual (Page 35)

Sending a Fax by Automatic Dialing
33
2. Sending
Fa
x
e
s
Dialing an auto-dial number with the SPEED key
1
Load the document(s).
•
If desired, press to set the
resolution and/or contrast.
2
Press and then enter the 2-digit Speed Dial number (for example,
press ).
3
Check the display. If the name or number shown is correct, press
. (If not, press and repeat Step 2.)
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 59).
Using a Speed Dial number for a voice call
To use a Speed Dial number for a voice call, lift the handset, press ,
and enter the Speed Dial number.
RESOLUTION/
RECEPTION MODE
SPEED
0 1
START/MEMORY STOP
SPEED
READY TO SEND