Pause control, Receive buffer, Vlan id – SMC Networks SMC EZ Card 1000 SMC9452TX User Manual

Page 41: Pause control -3 receive buffer -3 vlan id -3

Text mode
Original mode

ONFIGURING

THE

ETWORK

ARD

3-3

Pause Control

Pause frames are used to control network congestion. In this field
the card may be configured to transmit and to receive pause frames
(IEEE 802.3x dull duplex flow control). The default is “Enabled”.

Receive Buffer

This field lets you set the number of buffers allocated in the
memory for use by the card while receiving packets. Decreasing the
number of buffers reduces the memory requirement of the card.

VLAN ID

Select “VLAN ID” to configure the VLAN ID for the card. VLAN IDs
can range from 1 to 4094.