Samsung CLP 510N - Manual (Page 12)

Use the five Setup Menu buttons on the rear of the camera.
1. Press the SET button to access the setup mode.
Setup menu is displayed on the monitor screen.
LEFT button
UP button
SET button
RIGHT button
DOWN button
Setup
Camera ID OFF
Backlight OFF
Motion Detect.
OFF
Lens DC
Shutter ESC
Gain AGC
White Balance
ATW
Color Auto1
Sync. INT
Reset
End
Setup
Camera ID OFF
Backlight OFF
Motion Detect.
OFF
Lens DC
Shutter ESC
Gain AGC
White Balance
ATW
Color Auto1
Sync. INT
Reset
End
Setup
Camera ID OFF
Backlight OFF
Motion Detect.
OFF
Lens DC
Shutter ESC
Gain AGC
White Balance
ATW
Color Auto1
Sync. INT
Reset
End
S S E ET TU UP P M M E EN NU U
2. Select the desired feature using the UP or DOWN button.
Each time you press the UP or DOWN button, the
arrow indicator moves up or down.
Move the arrow indicator to the desired feature item.
3. Change the status of the selected feature using the LEFT or RIGHT button.
4. When completed, move the arrow indicator to 'End' and press the SET button.
Camera ID
If you enter a camera ID, the name will be displayed in the screen monitor.
1. Press the SET button to display the setup menu and move the arrow indicator to
'Camera ID' using the UP or DOWN button.
2. Set 'Camera ID' to 'ON' using the LEFT or RIGHT button.
Select the function
using the UP or
DOWN button.
Change the status
using the LEFT or
RIGHT button.
If the camera ID feature is set to 'OFF', the name will not displayed
in the monitor. NOTE
Notes
22 23 COLOR CCD CAMERA COLOR CCD CAMERA