Sanyo VCC-4115P - Manual (Page 15)

14
English
SPECIFICATIONS
■ ■ ■ ■ Camera:
SERVICE
This camera is a precision instruments and if treated with care,
will provide years of satisfactory performance. However, in the
event of a problem, the owner is advised not to attempt to
make repairs or open the cabinet. Servicing should always be
referred to your dealer or Sanyo Authorized Service Centre.
Scanning system : PAL standard
(625 TV lines, 25 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/4 inch solid state image
device CCD
Picture elements : 537 (H) x 597 (V)
Effective picture elements : 500 (H) x 582 (V)
Synchronizing system
: Internal sync, Line lock
manually switchable
Resolution : 350 TV lines horizontally, 400
TV lines vertically
Video output level : 1.0 Vp-p/75 ohms, composite
Video S/N ratio : More than 48 dB
Minimum required
illumination
(incandescent lighting) : Approx. 0.9 lux with a F 1.2
lens
Backlight compensation : MULTI/OFF switching,
CENT/OFF switching
Iris function : Manual EI/AI switching
Electronic iris range : 0.9 lux to 45,000 lux (F 1.2
lens)
Flange-back : 12.5 mm ± 0.5 mm
White balance : ATW/Manual switching
Lens mount : CS mount
Environmental conditions : Temperature: –10°C – +50°C
Humidity: less than 90%
(no condensation)
Power supply : 24 V AC, 50 Hz/12 V – 15 V DC
Power consumption : Approx. 2.8 W (with AI, lens)
Approx. 2.2 W (without AI, lens)
Weight : Approx. 280 g (without lens)
vcc4115p(gb).fm 14 ページ ２００２年９月９日 月曜日 午前１１時５４分