Sharp AQUOS LC-19DV28UT - Manual (Page 17)

15
Experiencing HD images
Using external equipment
An HDTV without an HD source is just an ordinary TV/DVD.
To enjoy HD images on the TV/DVD, you should get HD programming from the following:
Over-the-air broadcasting via HD quality antenna
HD cable/satellite subscription
HD compatible external equipment
NOTE
For information on updating to HD programming, ask your cable/satellite service provider.
•
•
•
•
Types of Connection
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external
equipment and use its appropriate terminals for higher quality images.
The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
Image
Quality
Terminal on external
equipment
Cable Terminal on the TV
HD
Quality
Standard
Quality
HDMI-certified cable ⇒Page 16
AUDIO
DVI OUT
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
⇒Page 16
Component video cable
Audio cable
⇒ Page 17
Audio cable
S-VIDEO cable
⇒ Page 17
AV cable ⇒ Page 17
•
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV/DVD.
NOTE
For information on updating to HD programming, ask your cable/satellite service provider. •
Displaying an External Equipment Image
1 Press INPUT.
A list of selectable sources appears. •
2 Press 0-5 to select the input source.
Each time INPUT is pressed, the input source toggles.
TV Input1 Input2
DVD Input3
You can also select the input source by pressing ▲/▼.
An image from the selected source automatically displays.
•
•
•
Input Select
1. Input1
2. Input2
3. Input3
4. Input4
5. DVD
[0-5]:Select
0. TV
54W0131B.indb 15 5/19/10 10:55:46 AM