Sanyo 42LM4RTC User Manual
Page 7
7
STARTING THE DRIVER CONTROL PROGRAM
Connect the touchscreen cable to a free serial port of the.
1. If the Touchscreen control panel is not already running, start the driver by clicking the icon on
the desktop or select the Windows™
START
button and
RUN
"Ma7_Control_En.exe"
with the
necessary path or
double click Ma7_Control_En.exe
from ‘Windows Explorer™’ or click the
short cut placed on the desktop.
When the program is started it displays the following window (Fig 1):
Fig 1
CONFIGURING THE COMMUNICATIONS PORT
When the program has loaded:
1. Select the
Comms
tab.
2. Select the comm port the Touchscreen is connected to.
3. Make sure the driver box called
'
Present'
is red and select the appropriate port that the
touchscreen is connected to.
4. Select a Baud rate of 19,200.
5. Tick the
'
Open
' box in the
Status
section.
6. When the driver recognizes the screen, the
Open
,
Active
and
Valid
boxes will go red (fig 2).
7.
The button called
Reset
will reset the touchscreen driver when pressed.