Sanyo 42LM4RTC - Manual (Page 6)

6
INSTALLATION
LOADING THE TOUCH DRIVER SOFTWARE ONTO PC
1. Switch on monitor
Do not plug the touchscreen interface cable into your computer.
2. Insert the ‘
Information & Touch Software installation CD’ into the PC and follow the
automatic installation instructions.
If the installation does not start automatically;
1. Click START on the Windows™ Taskbar; then click RUN.
2. Type d:\Autorun.exe where d is the letter of your CD-ROM drive. Click OK
3. Select the ‘Touch software’ button from the on-screen menu.
The software will create a subdirectory call
TouchScreen on your PC in the ‘ Program Files ’
sub directory and copy all the relevant files necessary to run the touchscreen into it. Once
completed, ‘
launch the application ’ will finish the installation. Please follow the instructions in
the next section to complete the installation and the setting up of your touch screen.
For Windows Vista™ users; When the installation has finished and the
dialogue box asks if you want to launch the application, un-tick the box. Instead, Select
‘Start’, ‘All Programs’, ‘Touchscreen’ and select Ma7_Control_En.exe to continue.