Sanyo 42LM4RTC User Manual

Page 10

ADJUSTING THE TOUCH SENSITIVITY LEVEL

Automatic Setup

When you receive your unit, the sensitivity settings will have been optimised when the unit was
manufactured. These settings should only be altered if you are experiencing problems such as
an electrically noisy environment. Contact your supplier if you need further explanation.

1. To select the sensitivity setup click on the

Sense

tab.

Fig 3

2. First set the

Course Sensitivity

to approximately two thirds by dragging the bar with your

mouse.

3. Set the

Press Threshold

to approximately one third by dragging the bar with your mouse.

4. Click on

Start Auto Threshold

. The following image appears:

Fig 4

5. Place your finger over the centre red circle (Fig4.) and follow it with your finger until it turns

green, then remove your finger. The automatic adjustment of sensitivity is now complete and
the screen returns to Fig 3.

Manual Sensitivity Setup

6. The

Coarse Sensitivity

slider is used to set the sensitivity of the touchscreen. If the slider is

set to the right, the touchscreen is more sensitive to detecting a touch. More or less
sensitivity may be required, dependent upon glass thickness or if the system is to be used
with gloved hands.

This manual is related to the following products:

42LM4WPTC