Charging the battery, Basics – Sprint Nextel T608 User Manual

Page 27

Basics

T608 Preliminary

Charging the Battery

It is vital that you use only approved chargers. Use of
unauthorized accessories could damage your phone
and void your warranty.

Note:

You should only charge your battery in an area where the

temperature is between 41º F and 113º F (5º C and 45º C).

To use the charger provided with your phone:

1. Plug the charger into a wall outlet.

2. Insert the other end of the

charger into the charger jack
on the side of the phone. The
yellow ring around the jack
corresponds with the yellow
tip on the charger.

ᮣ

Do not attempt to insert anything else into the
charger jack.

ᮣ

While charging, the

and

icons will

alternate in the display.

Note:

If the battery is fully discharged, it may take up to 30 minutes

before the battery charging icon appears in the display.

3. Wait approximately 4 hours or until the

icon

indicates that the battery is fully charged. If you do
not see the battery icon after this time, press any key
or the joystick to activate the display.

4. Once charging is complete, unplug the charger from

the wall outlet and disconnect the charger from the
phone.