Samsung DVD-V5650 User Manual

Page 16

ENG-16

O N N E C T I O N S

Connection to a TV (S-V

ideo)

Connecting to your TV using an S-Video cable.

- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and

color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio out or line out audio).

Using an S-V

ideo cable (not included), connect

the

S-VIDEO OUT terminal on the rear of the

DVD-VCR to the

S-VIDEO IN terminal of your

TV.

Using the audio cables, connect from the AUDIO

OUT

or LINE

OUT AUDIO (red and white)

terminals on the rear of the DVD-VCR to the
AUDIO (red and white) IN terminals of your

TV.

Turn on the DVD-VCR and TV.

ith the unit in stop mode, set the Alt video

output to

S-V

ideo

in the Display Setup menu (see

pages 61~62) or press the

PROGRESSIVE

button on the remote control until S-V

ideo is

output.

Notes
-

If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)

- The number and position of terminals may vary depending on the TV set.

Please refer to the user's manual of your TV.

- The S-Video jack only outputs video from the DVD player. To view video from the VCR, you must have the

Video Out (Yellow) or RF Out jack connected.

- You can hear sound from

LINE

OUT AUDIO

or AUDIO OUT (red and

white) terminals for S-Video connection.

VCR audio only outputs through the Line Out Audio jacks (Red,White).

White

Audio Cable

S-Video Cable
(not included)

Red

White

Press the input selector on your

TV remote

control until the S-Video signal from the DVD-
VCR appears on your TV screen.