Sprint Nextel Compass 597 - Manual (Page 26)

18 Section 2C. Using a Memory Card (microSD)
Removing the Memory Card (microSD)
1. Ensure you've completed any file transfers.
2. Safely remove the hardware:
Ⅲ Click the Safely Remove Hardware icon ( in Windows Vista; in Windows XP)
in the system tray, and click the Safely remove Mass Storage Device entry for the memory
card.
– or –
Ⅲ On your Mac, eject the drive.
3. Using your fingernail or a thin blunt object, gently press the
memory card in and then release; it should partially pop out
of its slot, as shown in the photo.
4. Remove the memory card and store it in a safe place.
5. Close the tab over the microSD slot of the USB modem.
Note The formatting procedure erases all the data on the memory card, after which the files CANNOT
be retrieved. To prevent the loss of important data, please check the contents before you format
the memory card.
Note The memory card can be easily damaged by improper operation. Please be careful when
inserting, removing, or handling it.
DO NOT remove a memory card while files are being accessed or transferred. Doing so will result
in loss or damage of data.