Sony CMT-CP1 - Manual (Page 6)

6
Step 2: Setting the
time
Before you can use the system’s timer
functions, set the internal clock.
The clock uses a 24-hour system on the
European model, and a 12-hour system on
other models.
The 24-hour system is used here for
illustration purposes.
2,4
1
3,5
1
Press TIMER SET.
The hour indication flashes.
000
2
Press l/L repeatedly to set
the hour.
1300
3
Press ENTER.
The minute indication flashes.
1300
4
Press l/L repeatedly to set
the minute.
1310
5
Press ENTER.
The clock will begin operating.
To reset the system clock
You can reset the system clock even when the
system is on or off.
1 Press TIMER SET.
2 Press l/L repeatedly until
“SET CLOCK” appears, then press ENTER.
3 Repeat step 2 to 5 in “Step 2: Setting the
time”.
Tip
If you make a mistake, start over from step 1.