Speco Technologies DVR-X1 - Manual (Page 18)

DVR-X1 User Manual
End ： Ending time for recording.
＊ Example: For 24H recording, the settings of the begin time must be the
same as the ending time (enter 06:00 am – 06:00am)
For other time settings, recording time from 08:00 am to
21:00 pm (enter 08:00 – 21:00).
b. Motion Detection Recording: According to the schedule time you
can set the camera for motion
detection recording.
REC ：
ON ： For Motion Detection Recording “ON”.
OFF ： For Motion Detection Recording “OFF”.
＊ key does not work during Motion Detect Recording.
BEGIN / END：
Begin ： Starting time for recording.
End ： Ending time for recording.
＊ Example: For 24H recording, the settings of the begin time must be the
same as the ending time (enter 06:00 am – 06:00am)
For other time settings, recording time from 08:00 am to
21:00 pm (enter 08:00 – 21:00).
SEN (Motion Sensitivity) ：There are 5 levels of sensitivity for motion
detection.
(1: High motion sensitivity rate, 5: Low motion sensitivity rate).
Grid (Motion Activity Grid) ：Move the cursor to Activity Grid, then
press key to enter the Motion Activity Grid display :
(Red block indicates the area under motion detection)
17