Sony RDR-HXD860 - Manual (Page 25)

C:\2886042111HXD860CEK\01GB-
HXD860CEK\050HOW.fm
master page=right
specdef 20060621
RDR-HXD860
2-886-042-11(1)
25
Ei
ght
Ba
si
c O
per
at
io
n
s —
G
e
tti
ng t
o
Know
Yo
ur D
V
D R
e
co
rde
r
Eight Basic Operations
— Getting to Know Your DVD Recorder
1. Inserting a Disc
1
Press DVD.
2
Press Z (open/close), and place a
disc on the disc tray.
3
Press Z (open/close) to close the disc
tray.
Wait until “LOAD” disappears from the
front panel display.
Unused DVDs are formatted
automatically.
• For DVD-RW discs
DVD-RWs are formatted in the
recording format (VR mode or Video
mode) set by “Format DVD-RW” in
the “DVD” setup.
• For DVD-R discs
DVD-Rs are automatically formatted in
Video mode. To format an unused
DVD-R in VR mode, format the disc
using the “Disc Information” display
(page 36) before you make a
recording.
If the disc is recordable on this recorder,
you can manually re-format the disc to
make a blank disc (page 36).
2. Recording a
Programme
This section introduces the basic operation to
record a current TV programme to the hard
disk (HDD) or to a disc (DVD). For an
explanation of how to make timer recordings,
see page 45.
1
Press HDD or DVD.
If you want to record to a DVD, insert a
recordable DVD.
2
Press PROG +/– to select the
programme position or input source
you want to record.
3
Press REC MODE repeatedly to select
the recording mode.
Each time you press the button, the
display on the TV screen changes as
follows:
For more details about the recording
mode, see page 45.
+ R
DVD VCD CD
DATA CD
-RW VR -RW
Video
+ RW -R VR
DATA DVD -R
Video
Z (open/
close)
DVD
Recording/playing side facing down
+ RW -RW VR -RW Video
+ R HDD
-R VR -R
Video
HDD DVD
PROG +/–
TV t
REC MODE
z REC
x REC
STOP
TV/DVD
DISPLAY
,continued