Drive specifications summary – Seagate SV35.5 SERIES SATA ST31000525SV User Manual
Page 10
4
SV35.5 Series SATA Product Manual, Rev. C
Table 1:
Drive specifications summary
for 1 Tbyte models
Drive specification
ST31000525SV
Formatted capacity (512 bytes/sector)*
1 Tbyte
Guaranteed sectors
1,953,525,168
Heads
4
Disks
2
Bytes per sector
512
Default sectors per track
63
Default read/write heads
16
Default cylinders
16,383
Recording density
1,474 kbits/in max
Track density
236 ktracks/in avg
Areal density
345 Gbits/in
2
avg
Internal data transfer rate
1,628 Mbits/sec max
Sustained data transfer rate
140 Mbytes/sec max
I/O data-transfer rate
300 Mbytes/sec max
ATA data-transfer modes supported
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Cache buffer
32 Mbytes
Height (max)
26.11 mm (1.028 inches)
Width (max)
101.85 mm (4.010 inches)
Length (max)
146.99 mm (5.787 inches)
Weight (typical)
677 grams (1.493 lb.)
Power-on to ready
<10 sec max
Track-to-track seek time
<0.5 msec typical read;
<1.5 msec typical write
Average seek, read
<8.5 msec typical
Average seek, write
<9.5 msec typical
Startup current (typical) 12V (peak)
2.0 amps
Voltage tolerance (including noise)
5V ± 5%
12V ± 10%
Operating temperature (Drive Case)
0° to 70°C
Nonoperating temperature
(Drive Case)
–40° to 70°C
Temperature gradient (max)
20°C per hour max (operating)
30°C per hour max (nonoperating)
Relative humidity
5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
30% per hour max
Wet bulb temperature (max)
37.7°C max (operating)
40.0°C max (nonoperating)
Altitude, operating
–60.96 m to 3,048 m
(–200 ft. to 10,000+ ft.)
Altitude, nonoperating
(below mean sea level, max)
–60.96 m to 12,192 m
(–200 ft. to 40,000+ ft.)
Operational Shock
63 Gs at 2 msec max
Non-Operational Shock
300 Gs at 2 msec max
Vibration, operating
5-22 Hz: 0.25 Gs, Limited displacement
22-350 Hz: 0.50 Gs
350-500 Hz: 0.25 Gs