SoundCraft Spirit Live 3-2 - Manual (Page 27)

SPIRIT LIVE 32 EXPANDER
Installation INSTRUCTIONS
Page 25
Equipment required:
o Screwdriver: No. 1 Pozidriv
o Spanner: 5/16 AF Open (8mm.)
o Spanner: M4
o Nut spinner M3
o Spanner M3 (open)
Installation Kit (packed with expander)
o 6 off M5 x 12 Pozi Pan Screws (Part No. NA0159)
o 12 off M5 Flat Steel Washer (Part No. NC0216)
o 6 off M5 Nyloc Nut (Part No. NB0116)
o 1 off M3 Pozi Pan Screw, Nyloc Nut and Washer
Assembly Instructions
1. Place the console on a flat clear surface, allowing plenty of space in
which to work.
2. Undo the pozidriv screws on both the top and base of the Console and
Expander. Keep all screws safely for reassembly.
3. Place the console base down with the faders towards you. Holding the
top panel at the front, lift the panel upwards while sliding gently to the
rear. Place the top panel face down on a flat surface. Repeat the oper-
ation on the Expander.
4. Using a screwdriver remove the screws securing the right-hand side
cheek of the console chassis.
5. Fit the side cheek to the right-hand side of the Expander using the
screws removed in stage 4.
BASE
BASE
➙
➙
➙
BASE
USERMAN.QXD 13/06/97 13:02 Page 25