Checking the configuration – Samsung 2063UW User Manual
Page 54
1.
The symbol showing that the device has failed to be installed is displayed as shown in (
,
)
2.
In this case, click ”Scan for hardware changes” to run the Setup Wizard again. At this time, if the
installation fails, click (
,
) and right-click it. Select ”Driver Update” from the displayed
menu.
Checking the configuration
Note
After the installation, you can check the configuration by following these steps:
1.
Right-click My computer, click Properties - System Properties - Hardware tab.
2.
Click on “Device Manager”.
3.
A list of installed devices will be displayed, as shown in the figure below.
Using the Software
53
This manual is related to the following products: