Sennheiser 502399 - Manual (Page 18)

16
Care and maintenance
Cleaning the headset
Use a soft, slightly damp cloth to clean the headset from
time to time. If the headset is very dirty, use a cloth
dampened with mild, soapy water. Do not use any
solvents or cleansing agents.
Replacing the earpads
For reasons of hygiene, the earpads should be replaced
from time to time.
̈
Grasp the edge of the earpad and pull sharply.
̈
Attach the new earpad to the earcup by pressing
firmly around the earpad until you hear all 12 latches
lock into place.
Danger of short-circuit due to the ingress of
water!
Water entering the housing of the headset
can cause a short-circuit and damage the
electronics.
CAUTION!