Siemens Gigaset 2400 - Manual (Page 6)

2. Highlight "New Entry" and press OK
3. Enter the letter of the name by pressing the keypad key
4. Press > to move to the number line and enter the number
5. Press OK
6. Highlight "Save Entry" and press OK
Pressing the
CK:)
will capitalize the next
letter. Correct mistakes by pressing <---I .
To move up or down a line use > or < .
Using Your Directory
1. Press DIRCTRY
2. Press
A and v to find the desired entry
3. Press OK to select
4.To dial selected entry press OK when "Dial Number" is highlighted, or you may edit the entry by highlighting "Edit Entry," and pressing OK.
Gigaset 2402
Basics:
Registering Extra Handsets
At the Base Controller:
1. Press and hold the lit button f or 4 to 30 seconds.
2.VVhen the button light begins to blink slowly, you have up to 90 seconds to register the handsets.
At the Cordless; Handset:
1 . Press
8
to turn on handset
2. Press OK at the " Please Register" prompt
3. Enter PIN (Default PIN is 0000)
4.Choose intercom number, press OK
Making a Call
External Calls (select a line if prompted)
1. Dial number, Press TALK or
2. Press TALK and dial number
Internal Calls
1. Press
(9
2. Enter intercom number 1-8 from the list displayed by pressing the related keypad number. All registered mobiles on the system will be shown, listing intercom number and name.
3. Press ALL INT soft key or press
K)
to call all handsets.
1. Press TALK or related -1 or L2 soft key and begin speaking.
Note: The line number (1-1 or -2) for the
ringing line is displayed. If you have Caller
ID*, the caller's name and number will
also be displayed.