Before using your home theater, Disc playback – Samsung HT-X200 User Manual

Page 12

OPERA

TION

Before Using Your Home Theater

To Operate your Samsung TV and the Home Theater with the HT-X200's Remote Control

Plug the main unit's power cord into the AC power supply.

■

Before plugging your system into a main socket, you must check the voltage.
If the voltage of the socket does not correspond to the setting on the rear of the unit, you
may seriously damage your system.

Press the

button to set the remote to TV mode.

Press the

POWER

button to turn on your Samsung TV

with this remote.

Press the

TV/VIDEO

button to select VIDEO mode on your TV.

Press the

DVD RECEIVER

button to switch to DVD RECEIVER mode to

operate the DVD Home Theater

Press the

FUNCTION

button on the main unit or

DVD

button

on the remote to enable DVD playback.

VIDEO

Disc Playback

Load a disc vertically into the Disc Insert Hole.

■

Insert a disc so that the label side faces forward.

■

Playback starts automatically.

To eject the disc, press the

EJECT

button.

• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection

system) recommendations.

To stop playback, press the

STOP

button during playback.

■

If pressed once, is displayed and the stop position will be stored in memory.

If the

PLAY/PAUSE (

)

button or

ENTER

button is pressed, playback resumes from the stop position.

(This function works only with DVDs.)

■

If pressed twice,

is displayed, and if the

PLAY/PAUSE (

)

button is pressed, playback starts from the

beginning.

To temporarily pause playback, press the

PLAY/PAUSE

(

)

button during playback.

■

To resume playback, press the

PLAY/PAUSE (

)

button again.

DVD

The DVD Home Theater's remote can be used to control Samsung TVs.

ALL

Press and hold the

NT/PAL

button on the remote controller for over 5 seconds

while the power is turned off.

■

By default, the video format is set to .

■

or will appear in the display. At this time, press the

NT/PAL

button shortly to

select between and .

■

Each country has a different video format standard.

■

For normal playback, the video format of the disc must be the same as the video format of your TV.

Selecting the Video Format

HT-X200(1~41P)-GB 2007.3.16 10:06 AM Page 22