SUPER MICRO Computer X8STE - Manual (Page 97)

Appendix B: Installing the Windows OS
B-1
Appendix B
Installing the Windows OS
After all hardware components have been installed, you must first configure Intel
South Bridge RAID Settings before you install the Windows OS and other software
drivers. To configure RAID settings, please refer to RAID Configuration User Guides
posted on our website at www.supermicro.com/support/manuals.
Please note that the Intel ICH10R South Bridge used on this motherboard
does not support HostRAID settings.
B-1 Installing the Windows OS for Systems with RAID
Functions
Insert Microsoft's Windows XP/2003 Setup CD in the CD Driver, and the 1.
system will start booting up from CD.
Press the key when the message-" Press F6 if you need to install a 2.
third party SCSI or RAID driver" displays.
When the Windows XP/2003 Setup screen appears, press "S" to specify ad- 3.
ditional device(s).
Insert the driver diskette- "ITE RAID XP/2003 Driver into Drive A: and press 4.
the key.
When the Windows XP/2003 Setup screen appears, press "S" to specify ad- 5.
ditional device(s).
Insert the driver diskette-"Intel AA RAID XP/2003 Driver for ICH10R" into 6.
Drive A: and press the key.
Choose the Intel(R) ICH10R 7. SATA RAID Controller from the list indicated in
the XP/2003 Setup Screen, and press the key.
Press the key to continue the installation process. (If you need to 8.
specify any additional devices to be installed, do it at this time.) Once all
devices are specified, press the key to continue with the installation.
From the Windows XP/2003 Setup screen, press the key. The 9.
XP/2003 Setup will automatically load all device files and then, continue the
Windows XP/2003 installation.