Sanyo VPC-HD100 - Manual (Page 21)

EN-20
Setting the Date and Time
The date/time needs to be set if/when:
„ The digital video camera is turned on for the first time.
„ The digital video camera is turned on after being left without battery for an
extended period of time.
1. Press the button until the digital video
camera turns on.
2. Press the MENU button.
3. Select [Setup] with the
f (
O) button.
4. Select [Date/Time] with the c (MODE) / d (MENU)
buttons, and press the button.
„ Select the item’s field with the e ( ) / f
(
O) buttons and adjust the value for the
date and time with the c (MODE) / d (MENU)
buttons.
„ The time is displayed in 24-hour format.
„ After confirming all settings are correct,
press the button.
5. To exit from the [Setup] menu, press the f ( O)
button.
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Press the MENU button.
2. Select [Setup] menu with the
f (
O) button.
3. Select [Language] with the c (MODE) / d
(MENU) buttons, and press the button.
4. Select the displayed language with the
c (MODE) / d (MENU) buttons, and press the
button.
„ The setting will be stored.
: Exit : OK
Setup
Language
Beep
Format
LCD Bright.
Date/Time
English
On
Next Menu
0
Next Menu
Y/M/D 00:00
Date / Time
: OK
2008 .01.01
: Exit :
Language
Beep
Format
LCD Bright.
Date/Time
English
On
Next Menu
0
Next Menu
OK
Setup