Sanyo VPC-T1060 - Manual (Page 35)

EN-34
Capture Mode
This sets the recording method at the time of capturing images.
„ In [Continuous], [AEB], [Burst], [Series+flash], [Pre-Shot] and [Couple Shot] capture mode, the
[Voice Memo] is automatically fixed at [Off].
Voice Memo
Refer to section in this manual titled "Recording Voice Memos" (page 25) for further
details.
LCD Bright.
Select a brightness level for the LCD monitor.
The LCD becomes brighter with the
c button and darker with the d button. The
adjustment !range is from -5 to 5.
Digital Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
* [ Blank ] Single: Captures one image at a time.
* [ ] Continuous: Permits continuous capture of up to 3 images.
* [ ] AEB: Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* [ ] Burst: Permits continuous photography while pressing holding the shutter button.
As long as you hold the shutter button pressed, images are captured until
the memory capacity is exhausted.
* [ ] Series+flash: Permits continuous capture of up to 3 images with flash.
* [ ] Pre-Shot: Lets you capture the background first, then have someone capture you in
front of it.
* [ ] Couple Shot: Uses separate areas to combine two shots. You can include yourself
in the shot.