Sanyo VPC-T1060 - Manual (Page 20)

EN-19
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.8" full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the button to turn the power on.
„ The status LED lights green and the camera is initiated.
„ If the power is turned on in [
] or [ ] mode, the lens will extend forward and it
is ready for shooting. In both modes, if the camera mode is changed to [ ], the
lens barrel will retract into the camera body after 30 seconds.
2. Set the button to [ ].
3. Compose your image in the LCD monitor.
„ Turn the zoom lever to side to zoom in on the subject, and enlarges the
subject on the LCD monitor.
„ Turn the zoom lever to side to zoom out on the subject, and provides a
wider angle image.
4. Press the shutter button.
„ Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure, and pressing the shutter button
down fully captures the images.
„ The focus area frame turns green when the
camera is in focus and the exposure is
calculated.
„ When the focus or exposure is not suitable,
the frame of the focus area turns red.
P
P
a
b