Initial settings, Setting the date and time – Sanyo VPC-T1060 User Manual

Page 18

EN-17

Initial Settings

Setting the Date and Time

The date/time needs to be set if and when:

The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an

extended period of time.

When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.

1. Set the

button to [

] or [

2. Press the

button.

3. Select [Setup] with the

f button.

4. Select [Date/Time] with the

c / d buttons, and

press the

button.

5. Select the date format with the

c / d buttons,

and press the

button.

Select the item’s field with the e / f buttons

and adjust the value for the date and time
with the

c / d buttons.

The time is displayed in 24-hour format.
After confirming all settings are correct, press

the

button.

6. To exit from the [Setup] menu, press the

button.

Setup

Date/Time

MENU:Exit SET:Enter