Skil 2346 - Manual (Page 12)

every six months. Only a genuine Skil replacement
motor specially designed for your tool should be used.
Cleaning
To avoid accidents, always
disconnect the tool and/or
charger from the power supply before
cleaning. The tool may be cleaned most
effectively with compressed dry air. Always
wear safety goggles when cleaning tools with
compressed air.
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through opening.
Certain cleaning agents
and solvents damage
plastic parts. Some of these are: gasoline, car-
bon tetrachloride,
chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
! WARNING
! CAUTION
IXO ATTACHMENTS
(AVAILABLE SEPARATELY)
The new SKIL model 2346 Cordless
Screwdriver is compatible with Skil’s innovative
iXO attachment system. These attachments
are available separately, and may not be
included with all iXO models. For details on
available attachments, please check the Skil
website: www.Skiltools.com
ASSEMBLY (see Figures 6-7)
For assembly of the attachments, pull the
rubber cap off the tool. Align the attachment
with the end of the tool. Firmly push the
attachment onto the tool until it is securely
fastened. The attachments can be mounted in
varying positions offset by 45˚.
22 23
®
FIG. 6
FIG. 7
SM 2610958721 05-08 5/14/08 11:33 AM Page 22