Smeg C6GMX - Manual (Page 6)

Instructions for the User
28
7. DESCRIPTION OF FRONT PANEL CONTROLS
All the control and monitoring devices are clearly in view on the front panel. The table below provides the
key to the symbols used.
OVEN THERMOSTAT REAR LEFT-HAND BURNER
FUNCTION SELECTOR KNOB REAR RIGHT-HAND BURNER
FRONT LEFT-HAND BURNER FRONT RIGHT-HAND BURNER
Before using the oven, check that the display is showing the symbol (see point “11. ELECTRONIC
PROGRAMMER”).
HOB BURNER CONTROL KNOB
To light the flame, press the knob and turn it anti-clockwise to the minimum
flame symbol .
To adjust the flame, turn the knob to the zone between the maximum ( ) and
the minimum ( ) settings.
To turn off the burner, turn the knob to the
position.
FUNCTION SELECTOR KNOB
The electric oven's various functions are suitable for different cooking modes.
After selecting the function required, set the cooking temperature using the
thermostat knob.
TOP AND BOTTOM HEATING ELEMENTS GRILL ELEMENT + FAN
BOTTOM HEATING ELEMENTS TOP + BOTTOM HEATING ELEMENTS +
FAN HEATING ELEMENT
GRILL ELEMENT FAN HEATING ELEMENT
WIDE GRILL ELEMENT DEFROSTING
THERMOSTAT KNOB
The cooking temperature is selected by turning the knob clockwise to the
required setting, between 50° and 260°C.
The light comes on to indicate that the oven is heating up. This light goes out
when the set temperature is reached. Flashes at regular intervals to indicate
that the temperature inside the oven is being kept constantly at the set level.