beautypg.com

Chapter 1: introduction, Advanced features – SMC Networks TIGERCARD SMC10GPCIE-10BT User Manual

Page 10

background image

1-1

Chapter 1: Introduction

The SMC TigerCard™ 10G 10GBASE-T and XFP Ethernet Server Adapters
combine the speed and performance of cutting edge networking with the ease of
deployment and user friendliness of traditional Ethernet. The speed and efficiency of
10G networking coupled with iSCSI support enables converged networking,
reducing cost and the complexity of wiring, and simplifying management. SMC’s
VNIC architecture provides the key to efficient server I/O and is flexible enough to be
applied to multiple server deployment scenarios. These deployment scenarios are:

Kernel Driver – This deployment uses a single instance of a VNIC interface for

standard operating drivers. This interface provides a performance-optimized path
for the kernel TCP/IP stack and contention-free access from the driver, resulting in
extremely low latency and competitive CPU efficiency.

Accelerated Virtual I/O – The second deployment scenario greatly improves I/O

for virtualized operating systems. The SMC VNIC architecture provides thousands
of protected interfaces to the host system, granting any application or virtualized
(guest) operating system direct access to the network hardware. This hypervisor
bypass technology, unique to SMC Ethernet controllers, is the only way to provide
solid I/O performance to virtualized guest operating systems.

Advanced Features

Virtual NIC Support – The core of SMC’s technology. Protected VNIC interfaces

can be instantiated for each running guest operating system or application, giving
it a direct pipeline to the Ethernet network. This architecture provides the most
efficient way to maximize network and CPU efficiency. The SMC Ethernet
controller supports up to 4096 VNIC interfaces.

PCI Express – Implements PCI Express 1.1.

Plug-and-Play – Provides binary compatibility with all data center and HPC

applications.

10 Gigabit Ethernet – 10 times the throughput of 1G Ethernet, 10G enables the

ability to design a cost-effective, high-performance 10 Gigabit Ethernet solution.

iSCSI Support – Reduced TCO (total cost of ownership) for shared storage and

converged fabrics.

iSCSI Acceleration in Virtual Environment – Reduce CPU utilization, lower

networking latency, improved machine utilization, and easier management.

RSS – Receive Side Scaling raises the utilization levels of multi-core servers

dramatically by distributing I/O load across all CPUs and cores.

This manual is related to the following products: